M.A.R.S. LibertyBOSS® Amalgam Separator

The LibertyBOSS® provides simple environmental compliance with no filter changes or service for up to 3 years.

There are options for a new installation of a LibertyBOSS®, as well as an option for simply replacing an existing LibertyBoss®. Please See the Options below and select the correct one for your office.

$1,381.00$1,524.00

SKU: MA-0101 Category:

Description

The LibertyBOSS® Amalgam Separator delivers over 99% amalgam separation and requires no maintenance for up to 3 years. There are no filter or canister changes. At the end of its service life (up to 3 years) the LibertyBOSS® should be replaced with a new one, and the old one sent in for processing. Shipping, Recycling, and the Compliance Certificate are included in the cost.

By July 14th, 2020, dental practices in the U.S. must be in compliance with the Environmental Protection Agency (EPA) final rule on amalgam separators (40 CFR Part 441). This rule requires either a ISO 11143:2008 certified or ANSI/ADA Standard No.108 certified amalgam separator. The LibertyBOSS® Amalgam Separator, when properly installed and changed at the end of its service life, will keep your practice in compliance.

The Liberty BOSS® Amalgam Separator is American Dental Association (ADA) tested at 99.4%, ISO 11143 certified at 99.9%, and is the only separator in the world to receive the Canadian Environmental Technology Verification (ETV) certification under license from Environment Canada for over 99% separation. It uses an ion exchange formulation that has been tested and proven to remove solid and aqueous mercury at over 99%, month after month, under real dental operatory conditions of 750 ml/minute.

The LibertyBOSS® is a completely sealed unit, so it protects you and your staff from soluble mercury, mercury vapor exposure, and cross-infection. Your office will be protected from the costly hassles and concerns of possible mercury spills, and will have a greatly minimized the risk of mercury exposure and interruption of business. A detachable self-contained unit means you get a new unit at every service life interval. This means no leaking cartridges, no messy in-house decanting, no mercury spills, no mercury vapor, and no environmental or OSHA infractions.

Features and Benefits:

  • The “BOSS” is the only separator to be certified by Environment Canada through Environmental Technology Verification (ETV).

  • The unit is certified at greater than 99% separation (ISO 11143 and ADA).

  • The “BOSS” is never opened in the dental facility – this eliminates any cross contamination of the office environment by released airborne pathogens.

  • The “BOSS” is made of low density polyethylene for strength and durability.

  • The “BOSS” has a sludge capacity of over 1 gallon.

  • Our ion chelating media bed with more than 25 ounces of media – This media is key to the removal of fine particulate in order to achieve over 99% separation.

  • The “BOSS” can easily accommodate 16 dental chairs for up to 12 months and some applications with pre-filters are running as many as 24 chairs through the M.A.R.S “BOSS”.

  • The maximum rinse rate for the “BOSS” is 34 liters/minute.

  • Large 1 ½” fittings and flexible hose attach to the existing plumbing, always maximizing flow rate. The system is designed to never compromise the suction and to minimize any stress on the vacuum pump.

  • No hard plumbing! No wall brackets! Small 12″ diameter footprint for ease of installation in confined spaces.

  • The “BOSS” separators exceed all provincial and city water department requirements for amalgam separation.

  • All confirmed installations are supplied with a M.A.R.S. Bio-Med Certificate of Compliance (upon request).

Understand the Options

Replacement of Existing LibertyBOSS®

Includes:

  • LibertyBOSS® Amalgam Separator

  • Certificate of Compliance

  • Written Guarantee of Compliance

  • Automatic compliance reminder at the end of the LibertyBOSS® Service Life

  • Shipping and recycling at the end of the LibertyBOSS® Service Life

New Install/Upgrade to LibertyBOSS®

This is for installing a LibertyBOSS® for the first time. This applies whether you are replacing a different brand of amalgam separator, or if the LibertyBOSS® is to be the first amalgam separator ever installed at the location. You must select whether a Wet Vacuum or Dry Vacuum will be used at the location.

Includes:

  • LibertyBOSS® Amalgam Separator

  • All Parts for Standard Installation

  • Installation Video

  • PowerLINZ® Evacuation Line Cleaner (1 Case)

  • Old Amalgam Separator Removal Kit (Recycling not Included)

  • Certificate of Compliance

  • Written Guarantee of Compliance

  • Automatic compliance reminder at the end of the LibertyBOSS® Service Life

  • Shipping and recycling at the end of the LibertyBOSS® Service Life

 

Also Available:

Documents:

LibertyBOSS® Brochure

LibertyBOSS® Brochure

LibertyBOSS® Owner's Manual and Installation Guide

LibertyBOSS® Owner’s Manual and Installation Guide

 

 

 

 

 

 

 

 

 

 

LibertyBOSS® Warranty

LibertyBOSS® Warranty

 

Additional information

Weight 15 lbs
Dimensions N/A
Options

Replace Existing LibertyBOSS®, New Install Kit for Wet Vac, New Install Kit for Dry Vac

Sign Up For Deals!